Purpose of This Bracket
This bracket will allow the consumer to convert bolt-on brackets to hook-on brackets. Thus, a bed frame with bolt-on brackets can be used with a hook-on headboard and/or footboard.
Adjust for Height and Width of Headboard / Footboard
- The #65 Up Hook Bolt-On to Hook-On Conversion Bracket for Headboard and Footboard Attachment allows the consumer to make an adjustment in height and width. Thus, different size headboards and footboards can be accommodated.
- Adjustment Range: Vertical: 4", Horizontal: 1 5/8"
Note on the Vertical Adjustment Range
The vertical adjustment dimensions are based on the bracket bolts being approximately 2 1/2" apart. Placing the bolts closer together would result in a greater vertical adjustment range, but could possibly decrease the strength of the connection.
Hooks Are Pointed Up
The #65 Adapto-Hook Bolt-On to Hook-On Conversion Bracket for Headboard and Footboard Attachment is not pictured upside down. On the #65, the hooks are made to point up, not down. This adapter lifts the headboard and footboard so they are not subject to weight stress. The #65 conversion brackets are made to lift and suspend the headboard and/or footboard. If you have an older headboard / footboard you do not wish to support your bed's weight, the #65 should be a great match.
Other Options in Bolt-On to Hook-On Conversion Brackets (See Under Recommended Products on Right Edge of Page)
- #711: For Vertical Adjustment -- The #711 Bolt-On to Hook-On Bed Frame Conversion Brackets provide vertical adjustment. If vertical adjustment of the headboard / footboard is needed, the #711 should be selected. This bracket is made of steel.
- #69 for Both Vertical and Width Adjustment -- The #69 Bolt-On to Hook-On Bed Frame Conversion Brackets provide both vertical and / or width adjustment. The #69 bracket is almost like the #65 but, the #69 has the hooks that point down instead. The #69 brackets are used when the headboard / footboard will support some or all of the bed weight. This bracket is made of steel.
- #35: For Vertical Adjustment -- The #35 Hook Plate Conversion Adapter Kit for Using a Bolt-On Frame with a Hook-On Headboard comes as a pack of 4, enough for both the headboard and footboard. If a vertical adjustment within the specified range of 2" is required, then the #35 would be the correct choice.. This bracket is made of steel.
- Bolt On To Hook On Design
- Works For Headboard Or Footboard
- Set Of 2 Included
- LIFETIME SERVICE POLICY